Oceanic OCEAVP40TB0 Guide D'utilisation page 19

2. COLUMN ASSEMBLY INSTRUCTION
- Loosen the plastic nut(16) ;
- Insert the lower tube(14) on the base decorative cap(15) and tighten the
plastic nut(16) ;
- Unscrew the rod fixing ring nut(13) ;
- Raise and lower the adjustable pole(12) carefully and firmly tighten the
set screw.
3. BODY ASSEMBLY INSTRUCTION
1. Unscrew the nut (6) counterclockwise to remove it from the motor housing. (8);
2. Place the rear grille (7);
3. Screw the nut (6) firmly to secure the rear grille;
4. Remove the plastic tip on the motor shaft and attach the fan blades (5) until
they reach the retaining pin;
5. Turn the nut of the blade (4) counterclockwise to the fan blade (5)
6. Clip the front grille (2) onto the rear grille (7). Make sure the grill ring (3) is
properly seated.
7. Tighten the screw on the grill ring (3) to secure the front grille (2) and the rear
grille (7).
19