Johnson JWAS14BINT Guide D'utilisation page 96

ERROR CODES
If there is a malfunction, the dishwasher will display error codes to
identify these:
Codes Meanings
Longer inlet time.
E1
Not reaching required
E3
temperature.
E4
Overflow.
Failure of orientation
E8
of distributary valve.
Keep pressing a
E9
button more than 30
seconds.
Washing control
Ec
system fail.
Failure of communi-
cation between main
Ed
circuit board with
display circuit board.
WARNING
If overflow occurs, turn off the main water supply before

calling a service.
 If there is water in the base pan because of an overfill or small
leak, the water should be removed before restarting the
dishwasher.
 If there is an error code that cannot be solved, please request
professional assistance.
Possible Causes
Faucets is not opened, or water
intake is restricted,or water
pressure is too low.
Malfunction of heating element.
Some element of dishwasher leaks.
Open circuit or break of
distributary valve.
Water or something on the button.
PCB or motor fail.
Open circuit or break wiring
for the communication.
47
V.1