Danby Products Sunbeam SBCR139WE Guide D'utilisation page 5

Occasionally, a minor problem may arrise, and a service call may not be necessary- use this troubleshooting
guide for a possible solution. If the unit continues to operate improperly, call an authorized service depot or
Toll Free Number for assistance.
PROBLEM
1) Does not work.
2) Refrigerator runs
continuously.
3) Internal temperature
not cold enough.
TROUBLESHOOTING
Tel:1-800-263-2629
POSSIBLE CAUSE
• No power to unit.
• Power cord is unplugged.
• Wrong voltage is being
used.
• Temperature set too warm.
• Door is not closed.
• Hot food inserted.
• Door opened too long or
too often.
• Close proximity to heat
source or direct sunlight.
• No power to unit.
• Power cord is unplugged.
• Temperature control too
low.
• Door is not closed.
• Hot food inserted.
• Door opened too long or
too often.
• Air flow obstruction.
• Wrong voltage is being
used.
• Close proximity to heat
source or direct sunlight.
4
SOLUTION
• Check connection of
power cord to power source.
• Plug in unit.
• Use proper voltage.
• Lower temperature
control.
• Close door securely.
• Be sure food is at room
temperature before inserting.
• Minimize door
openings/duration.
• Do not place unit close to
heat sources or direct
sunlight.
• Check connection of
power cord to power source.
• Plug in unit.
• Check setting and increase
as needed.
• Close door securely.
• Be sure that food is at
room temperature.
• Minimize door
openings/duration.
• Allow room for air to
circulate around unit.
• Use proper voltage.
• Do not place unit close to
heat sources or direct
sunlight.