Güde KM 7.14 Traduction Du Mode D'emploi D'origine page 10

Disposal
The disposal instructions are based on icons on the
appliance or its package. The description of all meanings
can be found in the "Marking" Chapter.
Transport package disposal
The package protects the appliance against any damage
during transport. Package materials are usually chosen
according to their environment friendliness and disposal
method and can therefore be recycled.
Putting the package into material circulation saves raw
materials and reduces waste disposal costs.
Parts of the package (e.g. foils, styropor) can be dangerous
to children. Risk of suffocation!
Keep parts of the package out of reach of children and
dispose them as quickly as possible.
Handling requirements
The operating staff must carefully read the Operating
Instructions before using the appliance.
Qualification
Apart from the detailed instruction by a professional no
special qualification is necessary for using the appliance.
.
Transport and storage
For any longer storage the appliance must be thoroughly
cleaned and stored so as unauthorised persons could not
access it.
- Empty the dirt collecting container
- Adjust the brushes to relieve them
- Store the appliance when it is dry
- To save spaces, the sliding handle can be folded.
Loosen the screws, pull the sliding handle out
and fold forward.
Assembly (pic. 1, 2)
When putting the appliance into working order, it is enough
just to fold up the sliding handle and tighten the screws
included in the supply.
Now adjust the sliding handle height. Loosen the screws
(pic. 1/6), select the required fixture and fix the sliding
handle in the desired height.
Operation (pic. 3)
When the sweeper is moved, the feeder brushes (pic. 3/5)
and sweeping brushes (pic. 3/8) start rotating, helped by
the belt drive. Rotating feeder brushes (pic. 3/5) drive the
dirt to the centre. It is then collected by both sweeping
brushes, running opposite each other (pic. 3/8) and taken
to the dirt collecting container (pic. 3/3).
Adjustment of feeder and sweeping brushes
Depending on the type of use and wear, it is possible to
centrally adjust the height of feeder brushes and the back
sweeping brush. Turn the central screw for height
adjustment (pic. 1/5). The deeper you adjust the appliance,
the closer to the ground the feeder brushes are going to be
and the more difficult it is going to be to move the appliance
forward.
Emptying the dirt collecting container
If you want to take out the dirt collecting container (pic. 1/3)
to empty it, take it by its handle and pull up.
If metal, glass or sharp objects have been swept, it is
necessary to use firm working gloves when emptying the
dirt collecting container.
Inspections and maintenance
Use a wet cloth for plastic parts cleaning. Do not use
any cleaning agents, solvents or sharp objects.
After every use
Remove the appliance off dust and dirt.
Empty the dirt collecting container.
Except the above, the appliance needs not be maintained any
further.
Service
Any technical questions? Complaint? Do you need spare
parts or operation manual?
Go to our website www.guede.com and the section Service
will help you quickly and without bureaucracy. Please, help us
to help you. In order to identify your device in case of complaint,
please indicate serial number, order number and year of
manufacture. All information is available on the product label.
To have all information always at hand, put them down.
Serial number:
Order number:
Year of manufacture:
Phone: +49 (0) 79 04 / 700-360
Fax: +49 (0) 79 04 / 700-51999
E-Mail: support@ts.guede.com
Important information for the customer
Please be sure to know that returning the product in or after the
warranty period must be made in the original packaging.
10