voestalpine Bohler Welding URANOS 2700 MTE Manuel D'instructions page 49

Cancel the operation by pressing button (2)
Remove the selected program by pressing button (1)
.
Resume the storage procedure.
3 Program retrieval
Retrieve the 1st program available by pressing button
.
Select the required program by pressing button
Select the required program by rotating the encoder.
Only the memories location occupied by a program are
retrieved, while the empty ones are automatically skipped.
4 Program cancellation
Select the required program by rotating the encoder.
Delete the selected program by pressing button (1)
.
Confirm the operation by pressing button (2)
All manuals and user guides at all-guides.com
.
XE
XA
.
XP
.
Confirm the operation by pressing button (1)
Cancel the operation by pressing button (2)
3.9 Interface personalisation
Allows the parameters to be customized on the main menu.
500 Allows the selection of the required graphic interface:
XE (Easy Mode)
XA (Advanced Mode)
XP (Professional Mode)
PROCESS PARAMETER
MMA
TIG DC
MIG/MAG
Pulsed MIG
MMA
TIG DC
MIG/MAG
Pulsed MIG
MMA
TIG DC
MIG/MAG
Pulsed MIG
.
.
( )
( )
( )
49