Mr. Blacksmith 9193780 Manuel D'instructions page 9


Caution : Always release load from the Shop Press before performing any inspection,
maintenance, or cleaning.

Before each use, inspect the general condition of the Shop Press. Check for structural failure,
loose, cracked,bent or damaged parts, misalignment or binding of moving parts, and any other
condition that may affect its safe operation. Do not use damaged equipment.

To prevent rust, coat all exposed surfaces with a light weight oil.

Always keep the Arbor Plates and Press Apron area clean and free of oil and other lubricants.

To clean, wipe with a clean, damp cloth.

When storing, keep the Shop Press covered with a clean drop cloth in a cool, dry location.
Maintenance
⚠WARNING