Mr. Blacksmith 9193780 Manuel D'instructions page 7

Is designed for automotive, truck, implement, fleet, and industrial repair shops where
Pressing , bending , straightening and forming, is required. Typical applications include
installation and removal of
Alternator and power steering pump bearings , axle bearings, transmission bearings, seals,
u-joints and others.the power unit on this press can't be equipped with a pressure gauge
Component
Capacity
Max working distance
Min working distance
Stroke

Keep children and bystanders away while operating. distractions can cause you to lose control.

Keep work area clean and well lit. cluttered or dark areas invite accidents. personal safety.

Wear ANSI-approved safety goggles and heavy-duty work gloves during use and service.

Stay alert and use common sense when operating. do not use when tired or under the influence
of drugs, alcohol or medication.

Do not overreach. Keep proper footing and balance at all times.

Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
Intended Use:
Technical Specifications
Important Safety Information
⚠WARNING
Size
12T
30 in.
1-3/16 in.
5 in.