Jata FR680 Instructions D'usage page 11

• The body of the appliance may reach high temperatures,
avoid touching it until after it has been unplugged for some
time.
• Do not leave unattended while in use.
• Avoid moving or changing the location of the fryer while in
use.
• The cooking devices must be placed in a stable position to
avoid spill of liquids and with the handles (if any) placed.
• This appliance is not intended for using with an external
timer or a separate system of remote control.
• This appliance has been designed for domestic use only.
• Do not use the fryer with a damaged plug or a deteriorated
cable.
• The cleaning and maintenance done by users, can not be
done by children.
• If the power cord is damaged, it must be replaced by the
manufacturer or by its after-sales service or similar qualified
personnel in order to avoid a danger.
INSTRUCTIONS OF USE
• Before using the deep fryer for the first time open the lid (1) remove the basket (9) and the handle.
• Assemble the handle (10) in the basket hook (12). To do it press the two wires of the handle and introduce
them in the holes of the support. Then turn it outside wards until it is inserted in the upper side of the
basket support.
• Remove the head (4) together the special mesh for oil filtering (3) and the resistance by pulling upwards
and remove the tank (5).
• Clean the basket and the tank with a damp cloth and dry them carefully.
• Replace again the tank, the special mesh and the head. Be sure to insert the resistance through the widest
opening of the "FILTRA PLUS" mesh handles (3).
• Verify that the head (4) is correctly put in place in its guides as it has a safety device which prevents the
fryer from working if the head is not correctly placed or out of its housing.
• Completely remove the cable from the cable collector (14).
• Pour the oil into the tank (5). Bear in mind that the oil level must always be between the minimum (MIN.)
and the maximum (MAX.) levels. Both levels are indicated in the inside of the tank.
• While you prepare the food for cooking you may heat up the oil. To do so, plug the deep fryer into the mains.
The "on" indicator light (7) will light on. This indicator will be always on when the deep fryer is plugged
to the mains.
• Turn the temperature selector (6) clockwise to the adequate position according to the food to be fried. The
"ready" indicator (8) will light on and the oil will begin to heat up. The higher temperatures are usually the
most adequate for frying food.
• Wait for the "ready" indicator light goes off; then the oil will have reached the selected temperature.
• Place the food to be fried in the basket (9). This must be done with the basket out of the tank, and the food
must not exceed the three-quarter parts of the volume of the basket.
11