Publicité
Les langues disponibles
Les langues disponibles
CHECKING THE INSTALLATION SITE
Clearances and dimensions
To install the range, refer to the following figure.
For installation in CANADA, a Free-standing range is not to be installed closer than 12mm
from any adjacent surface.
CAUTION
CAUTION
cabinet temperatures of 194°F. Make sure the wall covering, countertops and cabinets around the
range can withstand the heat (up to 194°F) generated by the range. If not, discoloration, delamination
or melting may occur.
1-3/5"
36"~36-4/5"
29-4/5"
Minimum dimensions
IMPORTANT
units, cabinet storage space located above the surface units should be avoided. If cabinet storage is to
be provided, the risk can be reduced by installing a range hood that projects horizontally a minimum of
5" beyond the bottom of the cabinets.
** 15"
Manual Installation_30 Oven_SECA_DG68-00109F-04_EN+CFR.indb 4
This range has been designed to comply with the maximum allowable wood
25"
29-9/10"
6"
28-1/5"
24-9/10"
25-9/10"
46-1/5" ~ 47"
7-1/2"
49-2/5"
24-3/10"
To eliminate the risk of burns or fire caused by reaching over heated surface
30"
* 30"
English - 4
3"
24"
3"
B
A
* 30" minimum clearance between the top
of the cooking surface and the bottom of
an unprotected wood or metal cabinet;
or 24" minimum when the bottom of the
wood or metal cabinet is protected by not
less than
/
" flame retardant millboard
1
4
covered with not less than no.28 MSG
sheet steel, 0.015" stainless steel, 0.024"
aluminum or 0.020" copper.
** 15" minimum between the countertop and
the adjacent cabinet bottom.
A : Cabinet opening
30" For U.S.A,
30"~31" For CANADA.
B : Acceptable
electrical outlet area
2017-08-10
5:34:43
Publicité
