Publicité
Les langues disponibles
Les langues disponibles
Contents
Contents
Important safety information
Installation requirements
Tool and parts
Location requirements
Product dimensions
Electrical requirements
Installation instructions
Install cooktop
Make electrical connection
Complete installation
2 English
Radiant Install_NZ30K7570R_DG68-00825A-07_EN+MES+CFR.indb 2
Important safety information
For your safety
2
• For Personal Safety, remove house fuse or open circuit breaker before beginning
3
installation.
Failure to do so could result in serious injury or death.
3
• Be sure your cooktop is installed properly by a qualified installer or service
4
technician.
4
• To eliminate the risk of burns or fire due to reaching over heated surface
6
elements, cabinet storage located above the surface units should be avoided.
If cabinet storage space is necessary, the risk can be reduced by installing a
7
range hood that projects horizontally a minimum of 5" beyond the bottom of the
7
cabinets. Cabinet installation above the cooktop may be no deeper than 13".
8
• Make sure the cabinets and wall coverings around the cooktop can withstand the
10
temperatures (up to 194 °F) generated by the cooktop.
• The cooktop should be easy to reach and illuminated by natural light during the
day.
• Always disconnect the electrical service to the cooktop before repairing or
servicing the cooktop. This can be done by disconnecting the fuse or circuit
breaker. Failure to do this could result in a dangerous or fatal shock. Know where
your main disconnect switch is located. If you do not know, have your electrician
show you.
11/22/2019 2:45:11 PM
Publicité
