Publicité
Les langues disponibles
Les langues disponibles
3. Secure the Cabinet
With assistance, lift and position the wall cabinet and interlock the hangers.
On the inside of the cabinet, measure and draw a mark on the back panel 5" (127 mm) down from the top and 5" (127
mm) in from each side.
Using a 3/32" drill bit, drill two holes 1/2" (13 mm) deep through the back of the cabinet into the hanger.
Secure the cabinet back panel to the hanger using the two provided wood screws.
Kohler Co.
5" (127 mm)
5
1384740-2-A
Publicité
