Publicité
Les langues disponibles
Les langues disponibles
Features and Parts
Preparations for Use
Installation Location
1. Ventilation condition
The position you select for the refrigerator installation should be well-ventilated with minimal hot air. Do not place your
refrigerator close to a heat source and avoid exposure to direct sunlight to guarantee optimum refrigerator performance with
minimum energy use.
Note: The amount of refrigerant charged for the unit can be found on the nameplatel.
2. Heat dissipation space
During operation, the unit gives off heat to surroundings. Ensure that there is adequate space between the refrigerator and
neighboring walls or large objects. A minimum spacing of 25.4mm (1.0") is highly recommended on the top, on both sides and at
the backside of the refrigerator.
Dimensions suggested below:
W
D
545mm (21.5")
596mm (23.5")
Note: The above figures only illustrate the space demand for the refrigerator.
H
A
1435mm (56.5")
902mm (35.5")
Upper Door Hinge
Middle Door Hinge
Thermostat/LED
Bottom Door Hinge
B
C(°)
1078mm (42.4")
130+2
- 4 -
Glass Shelf
Glass Shelf
Door Shelf
Crisper
E
Minimum
Minimum
25.4mm (1.0")
25.4mm (1.0")
CCD-0007759 Rev: 04-20-23
F
Publicité
