Publicité
WIRING EXAMPLE
INPUT CABLE
ENSURE CORRECT
TERMINATE
FIRST FITTING
IF UNUSED
ORIENTATION
* Supplied terminator MUST BE inserted into the last luminaire in the 'Daisy
Chain' to retain IP rating and complete the circuit
† Refer to PSU datasheet for detailed install data
Only use specified PSU (as shown on Page 7)
PSU
OUTPUT
DIM. CONTROL
REFER TO PSU MANUFACTURER INSTRUCTIONS FOR SPACING GUIDANCE
INPUT
RECOMMENDED IP-RATED
CONNECTION TO ON-SITE MAINS
Do NOT hot-plug
Do NOT reverse polarity
Do NOT exceed the maximum chain length for supplied fittings
Do NOT install below minimum chain length for supplied fittings
HORTI-BLAZE™ is a Class II product and as such does NOT require
connection to Earth
EXAMPLE SCHEMATIC
†
REFER TO TABLE ON PAGE 7
LINK CABLE MAY BE USED TO
EXTEND CONNECTIONS
BETWEEN LUMINAIRES
TERMINATOR*
Publicité
