Télécharger Imprimer la page

NEC MultiSync LCD1525S Mode D'emploi page 5

Publicité

Les langues disponibles

Les langues disponibles

Quick Start
To attach the MultiSync
instructions:
1. Turn off the power to your computer.
2. For the PC: Connect the 15-pin mini D-SUB of the appropriate signal cable
to the connector of the display card in your system (Figure A.1). Tighten all screws.
For the Mac: Connect the MultiSync LCD
(Figure B.1). Attach the 15-pin mini D-SUB end of the appropriate signal cable to the
MultiSync LCD
1525S
NOTE: To obtain the MultiSync LCD
call NEC Technologies at (800) 820-1230.
3. Remove connector cover and cable cover. Connect the 15-pin mini D-SUB of the video
signal cable to the appropriate connector on the back of the monitor. Place the Video
Signal Cable under Clip A (Figure C1).
Replace connector cover and cable cover.
4. Using the USB cable, connect the B type connector to the USB upstream port on the
back of the monitor and A type connector to the downstream part on the computer
(Figure D.1). If you are using the cord from the USB device, use one of the downstream
port on the side of the monitor (Figure E.1).
NOTE: Incorrect cable connections may result in irregular operation, damage
display quality/components of LCD module and/or shorten the module's life.
5. Connect one end of the power cord to the AC Adapter (#A2425S01) on the back of
the monitor and the other end to the power outlet (Figure F.1).
6. Turn on the monitor (Figure G.1) and the computer.
7. To complete the setup of your MultiSync LCD monitor, use the following OSM
• Auto Adjust Contrast
• Auto Adjust
Refer to the Controls section of this User's Manual for a full description of these OSM controls.
NOTE: For download information on the Windows 95/98 INF file for your MultiSync
LCD
monitor, refer to the References section of this User's Manual.
1525S
NOTE: If you have any problems, please refer to the Troubleshooting section of
this User's Manual.
78134761.wpc
LCD monitor to your system, follow these
®
Macintosh cable adapter to the computer
1525S
Macintosh cable adapter (Figure B.1). Tighten all screws.
Macintosh cable adapter,
1525S
3
5
controls:
9/16/99, 4:10 PM

Publicité

loading

Ce manuel est également adapté pour:

Multisync lcd serie