GreenWorks Commercial 2502802 Manuel D'utilisation page 15

ASSEMBLY INSTRUCTION
INSTALLING/REMOVING THE MULCHING PLUG (See Figure 5)
• To remove the mulching plug, lift the rear discharge door (1).
• Grasp the handle (2) of the mulching plug. Lift and pull the mulching plug out using the handle.
• The mulching plug (3) is inserted at an angle, so it requires some force to remove it.
• The mulching plug must be removed in order to install the grass catcher bag.
• The mulching plug must be re-installed when the grass catcher bag is removed.
(1) Rear discharge door
(3) Mulching plug
(2) Handle
Fig. 5
15