Toyotomi zibro RS-4022 Manuel D'utilisation page 20

I
TRANSPORTATION
Take the following measures to avoid fuel leakage during the transportation of
the heater:
1 Let the heater cool down.
2 Remove the removable tank
acceptance fitting (Fig. P). Some drops may leak from the fuel acceptance
fitting; keep a cloth at hand. Store the fuel acceptance fitting and the
removable tank outside the heater.
3 Place the transportation cap into the position of the fuel acceptance fitting
(Fig. Q). Press it tight.
4 Always move the heater in an upright position.
J
SPECIFICATIONS
Ignition
Fuel
Capacity (kW)
) **
Suitable space (m 3
Fuel consumption (l/hr) 0.195-0.229
Fuel consumption (g/hr)
Burning time per tank (hr) 17.5-20.5
Capacity removable tank (litres) 4.0
Monitoring of the quality of ventilation (air renewal):
Direct measurement of the CO
** Specified values are indicative
4
10
from the heater and remove the fuel
electrical Dimensions (mm)
paraffin (including base plate) depth
1.87-2.20
35-80 Accessories:
Required batteries
156-183
Wick type
Weight (kg)
level (NDIR CO sensor ¸).
2 2
width 422
281
height 446
manual fuel pump
transportation cap
4x LR20, MIN 1300
1.5V, size D
F
7.5
P
Q
Transportation cap