Pegasus 873-5104 Guide D'utilisation Et D'entretien page 7

Installation (continued)
5
Installing the plaster guard
□
Place the plaster guard (K) onto the body (D)
and secure with the screws (J).
J
K
D
6
Installing the shower arm
□
Insert the long end of the shower arm (B)
through the ange (A), and wrap thread
sealant tape around the long end of the shower
arm (B) in a clockwise direction, as shown.
□
Install the long end of the shower arm (B)
into the pipe elbow inside the wall. Carefully
tighten the shower arm (B) with a clean strap
wrench. Do not over tighten.
□
Wrap thread sealant tape around the pipe
threads of the tub spout outlet (1, not included)
in a clockwise direction, as shown.
□
Connect the tub spout outlet pipe (the tub
spout outlet pipe should project 4-7/16 in. to
4-11/16 in. from the nished wall) to the lower
pipe elbow (2, not included). Tighten the
elbow and tub spout outlet pipe connections
with a strap wrench.
B
7
Please contact 1-877-580-5682 for further assistance.
A
2
1
4-7/16 in.
to 4-11/16 in.
Wall
WWW.HOMEDEPOT.COM/PEGASUS