Pegasus 873-5104 Guide D'utilisation Et D'entretien page 10

Installation (continued)
11
Installing the shower head
□
Attach the shower head (C) to the shower arm
(B). Carefully tighten the shower head (C) with
a clean strap wrench.
Adjusting the temperature
1
Removing the handle,
escutcheon, and inverter
□
Unscrew the set screw (G) from the handle (F), and
then remove the handle (F) from the valve body (D).
□
Unscrew the escutcheon screws (AA), and
remove the escutcheon (E) from the valve
body (D).
□
Unscrew the sleeve (1) from the valve body (D).
□
Unscrew the screw (2) from the inverter (3),
and then remove the inverter (3) from the
valve body (D).
2
Remove the red limit stop ring
□
Remove the red limit stop ring (1) from the
cartridge assembly (2).
B
C
E
AA
F
G
1
10
D
3
2
1
2