Publicité
Les langues disponibles
Les langues disponibles
ASSEMBLY INSTRUCTIONS
1. Remove contents from box, making sure you have all parts listed.
2. Carefully stand up the Bench Legs (C,D&E) upside down on a flat surface. Attach the
Connector Panel (B) to the Bench Legs(C,D&E) with Bolt (F).
3. Attach the assembled legs & connector panel (step 1) to the Seat (A) with Bolt (F).
4. Tighten all the Bolts (F). Turn your bench right side up.
ADJUSTING LEG STABILIZERS
Before using the bench, make sure all legs are touching the floor simultaneously and are leveled.
1. To level legs, turn the stabilizer tip clockwise to lengthen, or counterclockwise to shorten,
until all legs are simultaneously touching the floor.
MAINTENANCE
Periodic visual inspection of this corner bench is recommended to ensure that all parts and
hardware are secure; that components are in good working order and not worn or loose;
and that there are no obstructions or impediments to normal, safe operation. If any part
or mechanism appears to be unsafe or damaged, do not use the product. If you experience
problems, please contact Medline at 1-800-MEDLINE | 1-800-268-2848.
CLEANING
To maintain appearance, dry after each use. DO NOT use abrasive powders, cleansers or
scouring pads.
1. Clean with regular household cleaning products. Use a non-abrasive cleanser with warm water.
2. Wipe dry after cleaning.
E
E
F
B
B
D
D
B
D
E
E
F
A
D
F
C
C
B
F
C
F
C
A
D
A
G2-501X1 (PIC-00303) (V1 010523) 3
Publicité
