Publicité
Les langues disponibles
Les langues disponibles
If overheating protection is stated regularly, contact your dealer or our after-sales service.
To reset the appliance, press the reset button located on the back side of the appliance. You must unscrew
the plastic protection (counterclockwise), press the reset button and replace the plastic protection (clockwise).
6. CLEANING AND MAINTENANCE
6.1 Safety instructions A insérer sur les matériels électrique chauffants
Before servicing (clean, maintenance, repair) unplug the appliance
Caustic detergents, sodium bicarbonate are forbidden for the cleaning of your appliance.
Check regularly the power cord.
Never dip your appliance in liquid.
WARNING
Not direct washing via water jets. (Neither jet under pressure)
6.2 Daily cleaning
Always unplug the appliance before cleaning or maintenance.
After each using clean the plate with a soft humid cloth
Regularly clean the dust filter. Every parts must be carefully dry before replaced in the appliance.
6.3 Safety instructions relating to maintenance
Daily check the state of your appliance: do not use it if it is damaged or if the power cord is damaged. If the
power cord is damaged it must be replaced by a professional electrician.
In case of break down contact your supplier.
Any intervention work on your appliance must be performed by a qualified professional.
6.4 Troubleshooting
Your appliance is provided with an overheating protection. When this protection has been activated you must
let your appliance cool down.
ADVICE
If overheating protection has been activated let your appliance cool down.
If your appliance does not start check the power cord.
The use of adaptors, multiple sockets and/or extensions is not recommended.
For any other anomaly contact your supplier.
ADVICE
Waste Electronic and Electric Equipment
To avoid any abuse and dangers and to fit the rules of the concerned countries before disposing of the used
appliance you must remove main electric cable.
17
Publicité
