Viscount Prestige 70 Guide Rapide page 36

Viscount Prestige 70
3. [S] button: "Set" button which enables memory saving. To save a memory, simply press the
[S] button and, keeping it pressed down, then press the button of the memory you wish to save,
whether it is dedicated or general.
4. [P] buttons: these buttons activate the couplings of the manuals with the pedal board, as follows:
o [P] (4A): coupling the second manual with the pedal board (II/P).
o [P] (4B): coupling the first manual with the pedal board (I/P).
5. [MEM+] and [MEM-] buttons: these buttons can be used to select the general memories in
ascending and descending order.
6. [M.SOLO] button: these buttons control the status of the MIDI Solo function for Man.II (6A)
and Man.I (6B). By activating this function, on the instrument connected to the [MIDI OUT]
port only the highest note of those pressed down will sound (monophony with priority given to
the highest note).
NOTE
The monophonic notes generated by the MIDI Solo are only sent on MIDI channel B.
For a detailed description of the MIDI channels controlled by the organ see the "Advanced
Manual".
7. [ENC] button: pressing this button activates the Enclosed function used to control the organ's
general volume by means of the [MAN.II] pedal.
8. [T] button: "Tutti" button, which turns on a preset series of voices and couplers.
The voice composition of the 'Tutti' function is programmable. To save a new set up, switch on
the voices and couplers of your choice, press [S] and, keeping it pressed down, then press
button [T] or the [TUTTI] foot piston.
9. [II] button: this button enables the coupling of the second manual with the first (II/I).
10. [O.SOLO] button: this button controls the status of the Organ Solo function. By activating
this function plus the coupling II/I the voices of the second manual can be played on the first
manual in monophony with priority given to the highest note. On the second manual the voices
continue to sound in polyphony.
11. [A.P.] button: this button enables the Automatic Pedal, used to play the voices of the pedal
board using the first 32 notes of Man.I. In this case, the organ pedal board is deactivated and the
voices become monophonic, with priority given to the lowest note.
12. Floppy disk drive: use only 720 Kb or 1.44 Mb 3.5" floppy disks.
13. [C] button: "Cancel" button, which switches off any voices, couplers and buttons on the manual
divisionals which may be on and turns the HR buttons on.
- Quick Guide
34