Télécharger Imprimer la page

Duronic Si2 Manuel D'utilisation page 8

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 14
Do not turn the iron upside down; there may be hot water in the water
tank.
Do not leave water in the water tank when not in use - this can corrode
and damage the soleplate.
Water will drip out of the iron if the temperature dial is not set.
Keep the appliance well away from surfaces and objects that can be
damaged by heat.
Ensure there is adequate space to operate the iron.
When not ironing, do not leave the iron face down. Stand it upright on its
heel, on a level heatproof surface.
Use this iron only with a purpose-built ironing board.
Observe all of the ironing instructions and ironing temperature dot settings
given by the garment manufacturer. These guidelines are normally on the
label/s inside the garment.
Always ensure the water filling does not exceed the MAX mark.
Always unplug the iron when refilling the water reservoir.
Do not iron buttons or fasteners. This could damage the iron.
During operation do not use when the light is on. When the light turns off
the iron has reached the correct temperature.
Do not iron directly onto synthetic fabric - instead iron the fabric inside out
or with the synthetic fabric covered by other material to protect it.
8

Publicité

loading

Produits Connexes pour Duronic Si2