Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Overhead mounting requires extensive experience, including amongst others calculating
working load limits, installation material being used, and periodic safety inspection of all
installation material and the device. If you lack these qualifications, do not attempt the
installation yourself. Improper installation can result in bodily injury.
Before mounting make sure that the installation area can hold a minimum point load of 10
times the device s weight.
CAUTION: When installing the device, make sure there is no highly inflammable material
within a distance of min. 0.5m!
2.
Connection:
Only use a stereo shielded cable and 3-pan XLR-plugs and connectors in order to connector
the controller with the fixture or one fixture with another.
O c c u pa t i o n o f X L R - c o n n e c t i o n :
If you are using controllers with occupation, you can connect the DMX-output of the
controller directly with the DMX-input of the first fixture in the DMX-chain. If you wish to
connect DMX-controllers with other XLR-outputs, you need to use adapter-cables.
Fixture Cleaning
The cleaning of internal must be carried out periodically to optimize light output. Cleaning
frequency depends on the environment in which the fixture operates: damp, smoky or
particularly dirty surrounding can cause greater accumulation of dirt on the fixture's glass.
Clean with soft cloth using normal glass cleaning fluid.
Always dry the parts carefully.
Clean the external glass at least every 20 days. Clean the internal glass at least every
30/60 days
10
Publicité
Table des Matières
