Laurus LEB10PBK Notice D'utilisation page 49

fully closed position, and remove the door
by pulling it towards you.
Removal of the Wire Shelf
To remove the wire rack, pull the wire rack
as shown in the figure. After releasing it
from the clips (a), lift it up.
a
5.2 maintenance
WARNING: The maintenance of this
appliance should be carried out by an
authorised service person or qualified
technician only.
Changing the Oven Lamp
WARNING: Switch off the appliance
and allow it to cool before cleaning
your appliance.
• Remove the glass lens, then remove the
bulb.
• Insert the new bulb (resistant to 300 °C)
to replace the bulb that you removed
(230 V, 15-25 Watt, Type E14).
• Replace the glass lens, and your oven
is ready for use.
• The product contains a light source of
energy efficiency class G.
• Light source can not be replaced by end
user. After sales service is needed.
• The included light source is not intended
for use in other applications.
Replaceable light source by a
The lamp is designed specifically for
use in household cooking appliances.
It is not suitable for household room
illumination.
• Do not try to scrape the lime residues
that may form on the floor of the
oven. Otherwise, the oven floor will be
damaged.
• In order to dissolve any lime that may
form on the floor of the oven, pour 200-
250 ml of white vinegar with an acid
ratio of not more than 6% onto the oven
floor after every 2 or 3 uses and wait for
30 minutes. Then clean it with a damp
wet cloth.
EN - 22
professional