Publicité
5
Correct Positioning: Slide the box into place so that the front and rear loads bars are centered
with the Attachment Brackets. Check to confirm that there is clearance to raise the vehicle's rear
hatch and there is no conflict with the antenna. Reposition and/or securely tighten load bars to
vehicle as needed.
6
Centered
Final Installation: With the load bars centered over the Attachment Brackets, turn the Mounting
Knobs clockwise to tighten. To finish, insert Wrench into Mounting Knob and continue to tighten
until firmly secure. Note: Do not use any other type of wrench to tighten hardware.
Special Note: For the MPG901, insert hole plugs (provided) into all unused channel holes.
Loading Precaution: All loads should be
equally distributed (see image) and secured.
Do not exceed the maximum permitted load
capacity of the bars (factory or aftermarket).
When in doubt, check with the vehicle or load
carrier manufacturer for final recommendation.
MALONE
ROOFTOP BOXES
CARGO SERIES
R
7
Publicité
