Siemens Fujitsu D1837 Mode D'emploi page 13

Mainboard D1837
Information about boards
Be sure to observe the following for boards with ESD:
●
●
●
●
●
An overview of the features is provided in the data sheet.
Special features
Your mainboard is available in different configuration levels. Depending on the configuration, your
mainboard is equipped with or supports special features.
This manual describes the most important properties of this mainboard.
Additional information on mainboards is contained in the manual "Basic information on mainboard"
on the "User Documentation" or "OEM Mainboard" CDs, or on the Internet.
Interfaces and connectors
The location of the interfaces and connectors of your mainboard is specified at the beginning of the
manual.
The components and connectors marked are not necessarily present on the mainboard.
External ports
The location of the external connections of your mainboard is specified at the beginning of the
manual.
PS/2 keyboard port, purple
PS/2 mouse port, green
LAN
LAN port (RJ-45)
Monitor port, blue
Audio input (Line in), light blue
A26361-D1837-Z110-1-8N19, edition 1
You must always discharge static build up (e.g. by touching a grounded object)
before working.
The equipment and tools you use must be free of static charges.
Remove the power plug from the mains supply before inserting or removing
boards containing ESDs.
Always hold boards with ESDs by their edges.
Never touch pins or conductors on boards fitted with ESDs.
Serial interface, turquoise
Parallel port/Printer, burgundy
Microphone jack (mono), pink
USB - Universal Serial Bus, black
Audio output (Line out), light green
English - 1