Nakayama PRO EC3010 Mode D'emploi page 4

EN
12. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.
13. Do not leave the equipment unattended while it is operating, to avoid the risk of fire, burns and electric shocks.
14. If the power cord is damaged, it must be replaced by the manufacturer or its customer service or a similarly qualified person in order to avoid hazards.
Intended use
Thank you for purchasing this product. Please read through these operating instructions and keep them for future reference.
Use this battery charger for the genuine Nakayama Pro battery pack only.
If the product is damaged or has any defect, please do not use it and bring back it to your dealer.
If you give this tool to another person, also give that person the instruction manual.
Description of main parts (Picture A)
1: Power cord
2: Lower cover
3: Electrical contacts
Technical data
Rated input voltage/frequency:
Output voltage/current:
Charging time:
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the
performance and safety of the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the
manufacturer's product line with similar features and may not be included in the product you just acquired.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special
adjustments, must only be carried out by technicians of the authorized service department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious injury or death. The
manufacturer and the importer shall not be liable for injuries and damages resulting from the use of non-conforming equipment.
Operating instructions
WARNING!
Do not use the charger outdoors or expose it to wet or damp conditions. Water entering the charger will increase the risk of electric shock.
Explosive gases. Prevent flames and sparks. Provide adequate ventilation during charging.
How to use the charger
There are two positions can operate the charger:
1) Horizontal: Put the charger on a table horizontally and make it stabilize.
2) Vertical: Install two nails on a wall vertically, put the charger on the two nails fixedly.
NOTE:
The charger has hanging holes for convenient storage. Install screws in the wall 50.8 mm apart. Use screws sufficiently strong to hold the
combined weight of the charger.
4
4: Upper cover
5: Wall mounting hole
220 V - 240 V / 50 Hz
20 V / 4.0 A
37.5 min. for 2.5 Ah battery
75 min. for 5.0 Ah battery
WWW.NIKOLAOUTOOLS.GR