Publicité
STEP 6
Attached the back panel as shown nailing straight into the raw edges.
Assure that the unit is square.
Distance from corner to corner must be equal as shown.
finished edges face down
ameriwoodhome.com
8
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
(x20)
Raw Surface
B
Assure that the unit is square.
Distance from corner to corner
must be equal as shown.
D
Flush the bottom edge of the
back panel with the bottom
edge of the bottom shelf.
Align squarely and nail straight
into back edges.
18
Publicité
