Sommaire des Matières pour Ameriwood HOME 1795096COM
Page 4
BOTTOM FIXED SHELF T1795096010GO T1795096020GO T1795096030GO QTY: 1 PC QTY: 1 PC QTY: 1 PC LEFT SIDE PANEL RIGHT SIDE PANEL PARTITION T1795096040GO T1795096050GO T1795096060GO QTY: 1 PC QTY: 1 PC QTY: 2 PCS RAIL RAIL RAIL T1795096070GO T1795096080GO T1795096090GO QTY: 1 PC QTY: 2 PCS QTY: 1 PC...
Page 5
PARTITION LEFT DOOR RAIL ADJUSTABLE SHELF T1795096120GO T1795096130GO T1795096100GO T1795096110GO QTY: 1 PC QTY: 1 PC QTY: 1 PC QTY: 2 PCS DOOR BACK PANEL UPPER BACK PANEL STOPPER T1795096140GO T1795096150GO T1795096160GO T1795096170GO QTY: 2 PCS QTY: 1PC QTY: 1PC QTY: 1 PC FOOT RAIL...
Page 7
M8 x 30mm M4 x 19mm Ø6 x 25mm Ø15 x 12mm ×36 ×36 ×38 ×4 CAM LOCK CAM BOLT WOOD DOWEL BOLT TGO2101 TGO2001 TGO2900 TGO1608 Ø4.2 x 25mm Ø3.5 x 14mm Ø3 x 12mm Ø4 x 14mm ×30 ×42 ×2 ×5...
Page 9
×13 ×12 2.1 Cam bolt (2) into (C) and (H x 2) as illustrated. 2.2 Insert (3) into (C) and (L) as illustrated. H X 2...
Page 10
×8 ×18 3.1 Cam bolt (2) into (D) and (E) as illustrated. 3.2 Insert (3) into (D), (E), (G) and (F x 2) as illustrated. F X 2...
Page 11
LOCK ×5 ×5 Proper orientation of CAM LOCK 4.1 Attach (J) into (A) with (5) as illustrated. 4.2 Attach (I) into (C) with (1) as illustrated. FINISHED EDGE UNFINISHED EDGE...
Page 12
LOCK ×6 Proper orientation of CAM LOCK 5.1 Attach (G) into (C) with (1) as illustrated. 5.2 Attach (H) into (F) with (1) as illustrated. UNFINISHED EDGE...
Page 13
LOCK Proper orientation of CAM LOCK ×4 6.1 Attach (F) into (C), with (1) as illustrated.
Page 14
LOCK Proper orientation of CAM LOCK ×4 7.1 Attach (B) into (F) with (1) as illustrated. 7.2 Attach (Q) into (B) as illustrated.
Page 15
LOCK Proper orientation of CAM LOCK ×8 8.1 Attach (D) and (E) into (C), (B) with (1) as illustrated.
Page 16
LOCK Proper orientation of CAM LOCK ×8 9.1 Attach (L) into (C) with (1) as illustrated. 9.2 Attach (A) into (D), (E),(L) with (1) as illustrated. FINISHED EDGE FINISHED EDGE...
Page 17
×42 10.1 Attach (P), (O) into (C) with (1) as illustrated.
Page 18
×4 ×24 ×4 ×2 ×8 ×4 11.1 Attach (K) with (11) as illustrated. 11.2 Attach (10) into (M), (N) with (6) as illustrated. 11.3 Attach (10), (M),(N) into (D), (E) with (6) as illustrated. 11.4 Attach (9) into (M), (N) with (4) as illustrated. 11.5 Attach (12) into (M),(N) as illustrated.
Page 19
Loosen the four screws "A" on bolt hinges. Two of them are usually in slotted holes which allows you to adjust up of down by a few mm. then tighten back up. Afloje los cuatro tornillos "A" en ambas bisagras. Dos de esos están usualmente en los agujeros llanos.
Page 20
×6 13.1 Attach (T) from backside with (6) as illustrated.
Page 21
Ø4 x 14mm LOCK ×1 ×2 ×2 Proper orientation of CAM LOCK 14.1 Attach (Q) into (C) with (1) as illustrated. 14.2 Attach (13) into (B) with (8) as illustrated.
Page 22
15.1 Attach (S) into (A) as illustrated. 15.2 Adjust the foot (R) before use. leveler...
Page 26
Pas la taille réelle (A) HAUT (B) BAS (C) ÉTAGÈRE FIXE (D) PANNEAU LATERAL GAUCHE (E) PANNEAU LATÉRAL DROIT (F) CLOISON (G) RAIL (H) RAIL (I) RAIL (J) RAIL (K) ÉTAGÈRE RÉGLABLE (L) CLOISON (M) PORTE GAUCHE (N) PORTE DROITE (O) PANNEAU ARRIÈRE (P) PANNEAU ARRIÈRE SUPÉRIEUR (Q) BOUCHON...