JAPANNEXT JN VT Serie Manuel De L'utilisateur page 5

Note: Please perform unpacking and assembly with at least 2 people.
1. Place a soft cloth on a flat and stable surface, and place the monitor screen on top with
the screen facing up.
2. Align the screw holes of the monitor and the stand according to the image below.
3. Attach the stand body and stand using the supplied screws.
4. Slowly lift the monitor while making sure that the monitor and base are securely attached.
*The shape and number of screws may vary depending on the model.
1. Make sure that the power of the monitor and computer is turned OFF before connecting
the cable.
2. Attach the cable (HDMI) that is compatible with the monitor to the monitor.
Attach the same cable to the computer.
3. Turn ON the power of the monitor and computer.
Warning: To work safely, always connect the ground wire before plugging in the power plug.
(Only if there is a ground link)
Also, when disconnecting the ground connection, always unplug the power plug from the outlet first.
Note: Do not connect multiple HDMI cables or USB memory sticks at the same time as this may cause
malfunctions. Please connect only one cable to one computer.
QUICK START GUIDE
Installation
Connecting to a Computer
Monitor stand
Screws for stand fixation
5