Adjusting Microphone Sensitivity; Monitoring Baby Silently - Philips SCD465 Mode D'emploi

Features
EN
10

Adjusting microphone sensitivity

With the microphone sensitivity switch (A-6) on the baby unit,
you can set the sound, coming from the baby unit, to the
desired level: low, mid or high.When set to the maximum level,
the baby unit monitors almost all sounds.You can only change
the microphone sensitivity if the connection between the baby
unit and the parent unit is established (when the LINK light
(B-5) lights continuously green).
• Use the microphone sensitivity switch (A-6) to adjust the
baby unit microphone sensitivity to the desired level.
You can use your own voice as a sound reference.
> The POWER light (A-5) on the baby unit lights up yellow
when a sound is picked up.

Monitoring baby silently

• Use the ON/OFF switch / VOLUME control (B-9) on the
parent unit to set the volume to the lowest level.
Do not switch off the parent unit completely!
> The sound level lights (B-8) on the parent unit visually alert
you to baby's sounds.The more sounds your baby makes,
the more lights you will see.
> When no sound is detected all sound level lights (B-8) will
be off.