Create Milk Frother Studio Mode D'emploi page 7

The user is ultimately responsible for their own safety. Children or persons
•
with physical disabilities, low perceptual abilities or mental disabilities
should not use this product unless they are supervised or have prior knowl-
edge of its use.
Close the lid properly and do not touch it while the frother is in use, to avoid
•
burns if it spills due to misuse.
This appliance comes with a separate power base. It will automatically turn
•
off as soon as the appliance is removed from the base.
The appliance should only be used with the supplied power base.
•
This appliance is not intended to be used with an external timer or separate
•
remote control system.
Accessible surfaces can reach high temperatures during appliance opera-
•
tion. Always hold the appliance by the handle when in use and until it has
cooled down.
Do not turn on the frother without first adding milk or it could cause over-
•
heating or dry burning of the product. It is considered dry burning when the
temperature is higher than 115 °C. The dry-burn protection will activate after
a continuous beep and the skimmer will stop. If you want to restart it, wait for
it to cool down before using it again.
After power on, if all the indicator lights come on for one second and there is
•
no response, the power base may not be making good contact. You can rotate
the frother to check if it has properly connected with the base.
• Open the packaging, save all the necessary information in it, take out the milk frother and con-
nect it to the power supply to check if it works properly.
• Please read the instructions carefully to check whether the accessories are complete.
• Clean the skimmer accessories before using it for the first time in accordance with the cleaning
and maintenance regulations.
BEFORE FIRST USE
E N G L I SH 7