Loading; Further Information - IARP JOY 30 LITE Instructions D'emploi Et D'entretien

7.4 LOADING

It is fundamental not to exceed the load limits indicated to avoid altering correct air
circulation and thereby avoid a higher product temperature.
For correct air circulation, a free space of 5 cm must be left between the product
of each shelf.
7.5

FURTHER INFORMATION

Take out packaging and clean all the cabinet using warm water together with 5% of neutral soap then dry it
with a soft cloth; for the glass parts only use specific products, avoiding the use of water which can leave on the
glasses limestone residues.
It is fundamental to comply with the distances indicated (cm) for correct installation of the equipment.
• Cabinet must be installed on a perfectly even surface, far away from any heat source (radiators, stoves, etc)
including sun rays.
• It is necessary that the capacitor unit is in the free air exchange condition, therefore the ventilation zones
must not be obstructed by boxes or otherwise.
• Install and position the unit in such a way so as to allow easy access to the power socket.
• Never place containers of liquid on or immediately above the ticket counter; should the content spill out, it
would damage the counter.
THE REFRIGERATOR IS NOT SUITABLE FOR WORKING IN DANGEROUS ENVIRONMENT WITH RISK
OF FIRE, EXPLOSIONS OR RADIATIONS.
Operation is regular with ambient temperature indicated on technical data plate.
10 10
10
-28-