LIMIT 7000 Mode D'emploi page 6

Limit 7000 have a built in signal for calibration.
GB
1. Push FUNCTION-button till CAL shows on the display.
2. The value on the display should be 94. If not, adjust the meters CAL potentiometer on
the meters right side with a small screwdriver so the value on the display is 94 dB.
AUTOMATIC / MANUAL OFF
The meter is preset for automatic off after 5 minutes. To chance off time.
1. Push DEL/MENU-button for 10 seconds till AUTO shows on the display.
Select new off time with ▲▼- buttons from 1 to 9 minutes. Select 0 for manual off.
2.
The meter can always be turned off by push the power Ө-button.
3.
BATTERY
When the battery symbol shows on the display. Remove the battery lid on the instruments
backside and replace with 4 pcs 1,5 V battery type AAA.
Remove always the battery if AC adapter is used or when the meter not is being used for a
longer time.
4