Redfox FTH-30 E Notice D'installation Et D'emploi page 9

device with combustible materials. In this case, it is necessary to make appropriate modi� cations to ensure
termal insulation of the combustible parts.
Attention!
Before the � rst use of the device wash the device with water containing detergent and than dry with the cleaning
cloth. Never leave the device on without supervision!!!
Drawer for superfl uous fat
You must check the drawer regularly and empty it in time. You must clean the drawer after each switching the
device off.
Switch on by main switch (B), turn the knob (B) and adjust required performance. Pilot lamps (A) and (C) will
light. Pilot lamp (A) lights when the device is connected to the electricity. Pilot lamp (C) lights when the heating
spirals are on. Pilot lamp (C) goes out when the device reaches adjusted temperature. Switch the device off by
turning the knob (B) into position „0" and switch off the main switch (A).
Maintenance
We recommend to have the device checked once a year by the professional service. Only quali� ed or competent
persons can do interventions in the product.
Comments and recommendation
Use the device only under supervision.
C
A
B
A – Main switch
B – Thermostat
C – Orange indicator
5