Rear Panel - HEADRUSH MX5 Guide D'utilisation Rapide

Rear Panel

1. Guitar Input (1/4"/6.35 mm, mono): Connect your guitar to this input using a
standard instrument cable.
2. Expression Pedal Input (1/4"/6.35 mm, TRS): Connect an optional additional
expression pedal to this input using a standard 1/4" (6.35 mm) TRS cable.
3. FX Send Output (1/4"/6.35 mm, stereo): Connect this output to the input of another
effects module, an effect pedal, or the effects loop return of an amplifier.
4. FX Return Input (1/4"/6.35 mm, stereo): Connect this input to the output of another
effects module, an effect pedal, or the effects loop send of an amplifier.
Note: You can set the FX Return Input to receive signal at rack level or stomp level
(default) in the Global Settings Menu.
Outputs (1/4"/6.35 mm, balanced): Connect these outputs to the inputs of your
5.
amplifier, audio interface, etc. If you only need to use one output, use the one labeled
Left/Mono.
Note: You can set these outputs to send signal at amp level or line level (default) in
the Global Settings Menu.
6. Phones Output (1/8"/3.5 mm, stereo): Connect standard 1/8" (3.5 mm) stereo
headphones to this output.
7. Aux Input (1/8"/3.5 mm, stereo): Connect an optional audio source (e.g.,
smartphone, tablet, etc.) to this input using an 1/8"/3.5 mm stereo cable.
8. MIDI Output (1/8"/3.5 mm): Use the included 1/8"-to-MIDI adapter and a standard
MIDI cable (not included) to connect this output to the MIDI input of an optional
external MIDI device.
9. MIDI Input (1/8"/3.5 mm): Use the included 1/8"-to-MIDI adapter and a standard
MIDI cable (not included) to connect this input to the MIDI output of an optional
external MIDI device.
Important: Do not connect audio devices (e.g., headphones, monitors, etc.) to the
MIDI Output or MIDI Input. Use the included 1/8"-to-5-pin adapters to connect MIDI
devices only.
10. USB Port: Connect this USB port to a computer using a standard USB cable. This
connection allows HeadRush MX5 to send and receive the digital audio signal to and
from your computer. You can also use this connection to import or export rigs, model
presets, setlists and impulse responses.
11. Power Input: Connect this input to a power outlet using the included power adapter.
12. Power Switch: Press this button to turn HeadRush MX5's power on. Press and hold
this button to turn HeadRush MX5's power off.
13. Vent: Make sure this vent is unobstructed while using HeadRush MX5.
1 3
2 4 5
10
8
6
9
7
13
12
11
5