MSI CLUTCH GM70 Mode D'emploi page 5

All manuals and user guides at all-guides.com
Install
Align the mouse and the tenon attached to the back side of the mouse cover with correct
orientation, and firmly fasten the cover to the mouse. The mouse should be ready for use
immediately.
Hardware Installation (for GM70 only)
Wireless Mode
1. Connect the USB dongle to your PC.
2. The mouse should be ready for use immediately.
3. If not, please press the Pairing Button on the bottom of mouse for three seconds to enable
the mouse.
Wired / Charging Mode
1. Connect the mouse to your PC with a USB cable.
2. Once the [Hardware found] notification is shown on the screen, you should be able to use
the mouse directly in the charging mode.
How to Recharge the Mouse (for GM70 only)
1. Connect GM70 to your PC with a USB cable.
2. The charging mode will be activated automatically.
※ It may take roughly 2 to 4 hours to have GM70 fully recharged, depending on the power
source connected to the mouse.
※ To obtain more functions, please visit MSI website at www.msi.com to download the specific
software for the device.
5