Télécharger Imprimer la page

AEG DBE5962HR Notice D'utilisation page 65

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 96
5. DAILY USE
5.1 Using the hood
Check the recommended speed according to
the table below.
While heating up food, cooking with covered pots.
While cooking with covered pots on multiple cooking zones or burners, gentle frying.
While boiling and frying big quantities of food without a lid, cooking on multiple cooking zones or
burners.
While boiling and frying big quantities of food without a lid, big humidity. After 6 minutes the appli‐
ance returns to previous setting.
Refreshes the air in kitchen after cooking at a very low noise level. It can be activated and de-
activated by touching the symbol. The function turns off automatically after 60 minutes. Use after
cooking only.
It is recommended to leave the hood
operating for approximately 15 minutes
after cooking.
The control Panel is a sensor field. To
operate the hood touch the symbol
exactly in the middle for at least 1
second.
To operate the hood:
1. Turn on the appliance by pressing the
symbol.
You can now activate the functions.
2. To activate the function touch the symbol.
The hoods light works independently to
other hood functions. To illuminate the
cooking surface touch
To turn off the appliance press the
again.
5.2 Hob²Hood function
It is an automatic function which connects the
hob with a hood. Both the hob and the hood
.
symbol
have an infrared signal communicator. Speed
of the fan is defined automatically on basis of
mode setting and temperature of the hottest
cookware on the hob. You can also operate
the fan using the hob manually. The function
can be activated from panel of the hob.
For more information how to use the
function refer to the hob user manual.
5.3 Activating Maximum Motor
Speed
When you touch
Speed starts to operate for 6 minutes. After
that time, the appliance returns to its previous
speed settings.
When the function is turned on, additional
touch on
does not have any effects.
5.4 Filter notification
Filter alarm reminds to change or clean the
charcoal filter and clean the grease filter. The
filter indicator
seconds if the grease filter must be cleaned.
The filter indicator
65
, the Maximum Motor
is turned on (red) for 30
flashes (red) for 30

Publicité

loading