weasy TIK12 Manuel D'instructions page 5

PARTS
Cooking plate
Base
Connector
On/Off switch
Raclette trays x 2
Socket
Wooden spatulas x 2
BEFORE FIRST USE
Remove all packaging materials.
The supplied two raclette trays are fixed on the bottom of the base. Unlock and remove them before
using the appliance.
Clean the cooking plate, trays and spatulas before using the appliance for the first time (See Cleaning
and Maintenance).
Wipe the outside of the appliance with a damp cloth.
Allow the appliance to heat for 10 minutes without any food before using it for the first time. The
appliance may emit a little smoke and smell. This is normal and will soon stop. Make sure that the
appliance has sufficient ventilation.
OPERATION
1. Place the base on a clean flat and heat-resistant surface.
2. Connect the appliance with the supplied power cord and plug the cord into the mains socket.
3. Switch on the appliance by pressing the On/Off switch to I.
4. Place the cooking tray onto the base and preheat the appliance for a few minutes.
5. Place the food you want to cook on the plate.
6. Cook the food until it is done.
• During cooking, turn the food over occasionally to ensure that both sides are evenly cooked.