back in place.
Never use abrasive cleaning products or hard met-
al scrapers to clean the appliance as they could
scratch the surfaces and break down the coating.
After cleaning leave the inside of the appliance to
dry with the door open before plugging it into the
mains again.
When re-stocking the appliance be especially care-
ful not to hit,scratch,crack or break the internal
surfaces.
TEMPERATURE ADJUSTMENT AND DESCRIPTION OF APPLI-
ANCE
TEMPERATURE ADJUSTMENT
Please electrify the chest freezer, the "POWER"
lamp will shine (green light).
Rotate the thermostat knob clockwise, the tem-
perature inside the chest freezer will be lower and
lower.
"COOLING" means cooling zone, "FREEZING"
meansthe freezing zone.
Recommended gear see the schematic marking po-
sition.
GB-32