Penguin W1608-GP-12 Manuel D'instructions page 40

Step 1
D-3
D-3
1.1 Decide the position of the door frames before assembly according to where you intend to
slide the door. At the front of the solarium, use frame D3 for the opening of the door and B3
for the direction of the door when open.
1.2 Align the Sliding Door Frame (D-3) with the Frame Next To Door (B-3), use the Connecting
Piece (E-3) to insert the Sliding Door Frame (D-3) and the inside of the door frame (B-3),
connect the outside in the same way.
NOTE:
When sliding the connectors, shake the frame so that they will slide easily. Do not use tools to
force it. If needed, clean the paint with a file and make sure the ends of the frame and joints are
not bent or warped. If so, use the needle-nosed pliers to straighten.
E-3
B-3
E-3
E-3
B-3
40
E-3
D-3
E-3 B-3
D-3
"Top View"
B-3