Publicité
Les langues disponibles
Les langues disponibles
10.1. Battery charging procedure.
•
Charge at temperature of ＋10°C~＋22°C indoor.
•
The three-way battery charger allows you to recharge the three batteries supplied at the same
time.
•
Make sure specifications on battery and adapter matched before charging.
•
The red LED light on the charger indicates the battery is charging, the green LED light indicates it is
fully charged. The approximate charging time is 2 to 3 hours, do not keep the batteries connected
longer than necessary as they may damage them.
•
The charging time is proportional to the state of their charge. Monitor the charging time by the LED
indicator (red light in charge, green light end of charge).
•
Disconnect the battery to the charger after charging is complete.
•
Make sure the battery is recharged at least every 3 months when not in use. Do not store the
machine with the battery connected.
11. Working environment
• Keep temperature of environment at 10°C ~ 22°C when charging battery, 0°C ~ +45°C when battery
is working.
• Keep tool at temperature of 0°C ~ +60°C when working
• Do not use in explosive atmosphere or near flammable substances or gases.
• Do not use in case of rain or on wet branches
12. Assembly
Check that the pruning shears and batteries are clean and dry, and then place the battery in the battery
compartment on the pruner.
35
Publicité
