Volpi PV295 Mode D'emploi page 34

9. Specification
1 Maximum blade opening
2 Rated Voltage
3 Rated Power
4 Rated Current
5 Current Protection Stop Point
6 Protection Level
7 Weight
1 Capacity
2 Voltage
3 Operating Hours
4 Weight (battery)
1 Input Voltage
2 Output Voltage
3 Recharging Current
4 Protection Level
5 Charging Time
10. Charging the Battery
Do not dispose battery under high temperature or vibration environment to avoid liquid
leakage from the battery.
isconnect the battery from tool before charging.
D
Always make sure the battery is dry and clean before charging.
•
Make sure the battery is fully charged before first time using.
•
The battery is not fully charged when you buy, you must charge 2-3 hours before using first time.
•
Before recharging the battery, check the remaining charge on the display.
•
Need to replace battery if battery running time is not enough. Users can only use the original
equipment manufactured by the customer center (OEM) battery pack.
•
Keep safety rules and environment protection information in mind all the time.
Pruning Shear specifications
Battery (lithium-ion)
Charger
28mm
DC14.4V
150 W
10.4 A
≥45A
Ⅱ
0.70Kg
2.5 Ah
14.4V
4 h
0.25kg
100-240V AC ,50-60Hz
DC16.8V
1.0A
Ⅱ
2-3 h
34