asalvo 20154 Manuel D'instructions page 8

8
Adjust the distance of both
arms to get the best range.
EN
The Buggy Board is ready to
serve you
Remove the plastic lid from the foot-board. Mount it at the seat post for storage.
Connect the seat with the seat post and insert the seat post and fasten it with the knot.
Please make sure it is securely tightened before in use.
Adjust it to the desired height of seat and fastened it with screws securely.
The handle bar can be adjustable in two-section.
Your Buggy Board is now ready to use as a seating rider.
Fasten the lock as
illustrated.and make sure it
is firmly in place.
CONVERT THE UNIT TO BE A SEATING RIDER
Adjust the platform levelly
to the ground and adjust
the knob to tighten it up as
illustrated.
Buggy Board is equipped with
an adjustable strap that helps
to storage the unit when not
in use. Attach the strap onto
the handle bar and hook the
unit at the bottom firmly as
illustrated. Attention: Storage
strap may not be suitable for
some baby buggies. Please
consult with the vendor for
information.