Würth ASA 18 COMPACT Traduction Des Instructions De Service D'origine page 18

Respiratory injury from dust created by operating
the product – Wear suitable protection depending
on type of dust.
Dust extractor
Article number
Voltage
Compatible model
Maximum bit diameter
Weight
Ambient operating
temperature for the tool and
battery pack
Ambient storage
temperature for the tool and
battery pack
Recommended ambient
charging temperature
Know Your Product
See page 3.
1. Nozzle
2. Bit brush
3. Tool and Bit adjustment button
4. Depth gauge button
5. Depth gauge
6. Hammer contacts
7. Dust box buttons
8.
9. Hammer release button
Intended Use
The dust extractor can be used for collecting dust
generated by drilling.
The product can only be used together with the power
ASA 18 COMPACT
5701 407 000
18 V/DC
ABH 18 COMPACT
16 mm
1.86 kg
0 - 40°C
0 - 27°C
5 - 40°C
For damage caused by usage other than intended, the
user is responsible.
Symbols
Read all safety warnings and all
instructions.
Warning
V Volts
Direct current
No-load speed
CE conformity
Waste electrical products should
not be disposed of with household
waste. Please recycle where facilities
exist. Check with your local authority
or retailer for recycling advice.
Battery
A battery that is new or has not been used for a longer
period does not develop its full capacity until after
approx. 2 – 3 charging/discharging cycles.
Do not place down the battery on radiators or expose
it to intense sunlight for longer periods; temperatures
above 50 °C cause damage.
Keep the contacts/terminals of the charger and
replaceable battery clean. For optimal service life,
fully charge the battery after use.
Overload protection
When overloading the battery through very high
power consumption, e.g. from extreme high torque
applications, jamming of the drill bit, sudden stopping
or short-circuiting, the power tool will hum for 2
then press it again.
18