Trebs Comfortcam 99501 Mode D'emploi page 38

Motion Detection
When the recording is set as Triggered, you can set the detection areas and detection
sensitivity.
1. Preview: Click Refresh View to refresh the image.
2. Set Detection areas: Set detection areas on preview image.
- Full Area Detection: Detect all areas.
- Custom Detection: Detect customized areas.
- Add New Area: Click and drag to add new areas.
- Delete Area: Click the area you want to delete.
- Delete All Areas
- Test Detection: Move the objects, when the motion is detected, the color of the area
changes. Then the test succeeds.
3. Sensitivity: Adjust motion detection sensitivity. (Tip: In order to make it more sensitive, you
can add more detection areas)