Trebs Comfortcam 99501 Mode D'emploi page 33

Install USB camera
1. Install the software enclosed CD.
2. Connect the camera to the power outlet with the adapter in the package, turn on the power
switch
3. Connect the USB receiver to your PC and then run application software, you will see the
main operation window of this product.
Main Window
1. Display Area: This area shows the image from the camera or playback. You can choose to
view in single channel or 4-channel quad mode.
2. Channel Status: This area shows the status of one specific camera.
: This icon means the camera is detecting.
: This icon means the camera is in standby mode.
: This icon means the camera is recording.
3. Operation menu: You can operate as below.
- Snapshot: Take a picture and save it.
- Detect: Switch between active and standby mode.
- Web Server: Activate remote network surveillance mode.
- Setup: Enter setting interface.
- Playback: Playback recorded files.
4. Camera/Display control: You can operate as below.
: Signal strength
: Pair up the camera and receiver, select a channel and press Pair button on the
camera head within 10 seconds.
: Open a snapshot
: Adjust the size of display area
: Single channel display