Samsung The Terrace TQ55LST7T Mode D'emploi page 16

Pairing the TV to the Samsung Smart Remote
Installing batteries into the Samsung Smart Remote
1
2
1. Press the button at the top rear of the Samsung Smart Remote. The body will pop out slightly from the
body cover.
2. Turn the remote over, push the body of the remote upwards until the battery compartment is revealed,
and then remove the battery cover.
3. If there are batteries in the remote, to remove the existing batteries.
4. Insert two new batteries (1.5V AAA type) into the battery compartment making sure that the batteries'
polarities (+, -) are oriented correctly.
5. Once the batteries have been inserted, attach the battery cover and then slide down the body of the
remote.
6. Turn the remote over, press and hold the
down into place.
• Alkaline batteries are recommended for longer battery life.
English - 16
When you turn on the TV for the first time, the Samsung Smart Remote pairs
to the TV automatically. If the Samsung Smart Remote does not pair to the TV
automatically, point it at the remote control sensor of the TV, and then press
and hold the buttons labelled
simultaneously for 3 seconds or more.
3
button on the top rear, and then slide the body of the remote
and as shown in the figure on the left
3
1
2