AVENZO AV-TW5006 Manuel D'utilisation page 13

Power On, Pairing and Power Off
To turn on or off the earphones you must follow this procedure:
Power On: To turn on the earphones, first remove the left earphone (L) and then the right
earphone (R).
Both will blink blue and red, synchronize with each other, and enter pairing mode, and we
will hear "Pairing" on both earphones.
If we have already synchronized them with the mobile, the earphones will connect directly
with the smartphone.
Pairing
The first time we use the device, we will have to pair it with our smartphone. This
procedure will have to be repeated every time you want to connect the earphones to a
new device. To turn on the headphones, we follow the procedure previously explained in the
manual. The earphones will flash blue and red, and then connect to each other. The right
earphone will flash blue and red, and you will hear the word Pairing. The left earphone will
flash blue.
From your smartphone, look in the list of Bluetooth devices for the "Avenzo AV-TW5006" and
connect.