Publicité
Les langues disponibles
Les langues disponibles
3. Hang Display onto the Wall Plate
Wall
Using an assistant or mechanical lifting equipment, hook the display with attached adapter brackets over the
top of the mounted wall-plate. Tighten the two bolts on the bottom of the adapter brackets to secure the unit.
4. Adjustment
To adjust the tilt angle, loosen the Tilt Adjusting Knobs located on the sides of the adapter brackets. Once the
display is at the desired angle, retighten the knobs to hold.
Maintenance
• Check that the bracket is secure and safe to use at regular intervals (at least every three months).
• Please visit www.tripplite.com/support if you have any questions.
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
14-04-251-933337.indb 8
Wall
Tilt Adjusting Knob
8
Bolt
0°
-10°
5/7/2014 3:38:21 PM
Publicité
